Posts

Personal Reflection

Image
Personal Reflection The project that I have chosen it critically review which had revealed my strengths, weaknesses and thought processes in completing the best piece of work throughout the course was the blister. The reason why I have chosen this is because it required myself to think about different ways in which I could be completing my blister to perfection. The weaknesses that I had encountered when completing this module of the course was trying to think of shapes to hit around the corners of the blister to give it the shape. Therefore, I decided to make a corking tool that I was able to hit the edges of the blister, so I can make the depressions of the blister. With the corking tool I had to be very careful as I didn’t want to stretch the edges of the sheet metal that it would begin to tear. The strength that I had found out when I completed this blister, was that earlier in the semester when we completed the bowl, we had to use the radius to measure ci
Post a Comment
Read more

Fuel Tank

Image
Fuel Tank - Major Assignment  To commence our major assignment, we were presented with two types of fuel tanks that as a group we were to replicate a 1:1 scale. As a group, we choose the peanut fuel tank that we were going to complete rather than the other fuel tank which required extra work with dips, curves and bends within the tank. As we opted for the peanut fuel tank, we started to measure the tank for actual dimensions, so that when we use Auto Desk Slicer to create the 3D model, we can get it to that 1:1 scale. Once we created the template on Auto Desk Slicer, we were required to use the laser cutting machine to cut the templates. Slowly, the laser cutter separated our fuel tank into 24 pieces, which we had to assemble carefully, however even though it was fully assembled, it still felt wobbly. To rectify this, we asked Gabe for access to the hot glue gun and started to spread it on the edges and corners of the template. After two minutes, the template began to become stur
Post a Comment
Read more

The Blister

Image
THE BLISTER Within this week’s lecture, we were being assessed on shaping and forming a blister from metal sheeting. When we presented ourselves within the design labs, we came were introduced by Russell who gave us a theoretical lesson on how to form and shape the blister. We were instructed that we will be forming our templates via CNC Machines which Edward had cut for us.  CNC Machine creating the templates One we had both of our templates, we had to cut the holes within the template, as our metal sheet would sandwich in between the two templates. We used screws to hold both plates together so it doesn’t shift when we are forming our blister with a nylon mallet and corking tool.  Using Corking Tool to hit the edges of the Sheet Metal When I had my templates and tools, I clamped the templates on both sides of the work bench. Initially, I used the nylon mallet to hit around the middle of my metal sheet so it can get some shape. Then to get the shape around the
Post a Comment
Read more